| |
|
| |
How do I change the orientation
of my output shaft?
| • |
Remove bolts from the bearing carrier
on the output shaft side. [photo] |
| • |
Grasp output shaft and pull the output
shaft assembly and the bearing carrier, with the shims,
gently away from the housing - using caution not to
tear the shims. [photo] |
| • |
Remove opposite solid bearing carrier
keeping the shims with the carrier. [photo] |
| • |
Then re-install the output shaft
bearing carrier on the opposite side. [photo] |
| • |
Tighten bolts to specifications [page
16 fig. 5] |
|
|
|
|
1.
